Performance Benchmarks

5 Piece Collapsing Core Technology to Produce Paint Cans

June 16, 2022

June 16, 2022 David Bacon, General Manager KW Containers commented: “We are using this technology to produce cans in sizes…

Running 30% faster

January 12, 2019

Both molds are running faster cycles and our QC department has approved the parts. This is a big improvement for…

Setting new Speed Benchmarks II

October 31, 2014

A 2 x 8 stack mold running thinwall, 16-oz dairy containers at what was said to be an “unprecedented” cycle…

Setting new Speed Benchmarks

October 27, 2014

“StackTeck ran its next-generation 1881 tamper-evident carbonated soft-drink cap mold with four cavities in 2.8 sec, cutting more than 1…

High-quality, efficient, low-cost Solution

March 27, 2014

“The 5 piece collapsing core technology enabled us to produce low weight parts with higher cavitation moulds, all with a…

The ONLY mold supplier that has Exceeded our Expectations

Mexico

"During the 19 years that Goplas has been operating, we have bought molds from many companies in different countries; Italy, Germany, Mexico, China and Canada. From all of the injection molds that we have, only two have delivered results that are above the expectations that we had for them. Both molds were made by StackTeck in Canada." Continue Reading

Delivered medical PPE face-shield stack mold in incredibly short timeframe

North America

StackTeck delivered a for us a 2x2 Stack Mold in only 3 1/2 weeks to produce PPE face shields for healthcare and other frontline workers during Covid-19 Continue Reading

5 Piece Collapsing Core Technology to Produce Paint Cans

David Bacon, General Manager KW Containers commented: “We are using this technology to produce cans in sizes of 0.5 Liter, 1 Liter, and 1 Quart round cans. We are very pleased to have found a more sustainable option to produce our cans that use recycled PP material supplied by our sister company, KW Plastics. StackTeck Continue Reading

Dramatic light-weighting of a Thinwall Container

Thailand

"StackTeck’s TRIM proposal dramatically light weighted a thinwall container resulting in a weight reduction of more than 35%." Continue Reading

Integrity and Professionalism throughout StackTeck

Latin America

"With 25 years experience in this industry, I recommend StackTeck for the quality of its molds and the professionalism of its technical, accounting and engineering staff." Continue Reading

Setting new Speed Benchmarks II

USA

A 2 x 8 stack mold running thinwall, 16-oz dairy containers at what was said to be an "unprecedented" cycle time of 3.3 sec. It ran on an Engel all-electric e-speed 650T press. Continue Reading

Setting new Speed Benchmarks

USA

"StackTeck ran its next-generation 1881 tamper-evident carbonated soft-drink cap mold with four cavities in 2.8 sec, cutting more than 1 sec off the previous speed." Continue Reading

First-class 2×2 five-liter Container Stack Mold

USA

“Our molding technicians said, of the 3 new molds we received, we liked the StackTeck tool the best. It’s a first class 2x2 5 Liter Container stack mold.” Continue Reading

Surpassed our Technical and Service Expectations

Brazil

"Highly recommend StackTeck as a supplier of molds and post-sale mold service as they are a company that is serious, responsible, organized, and passionate about customer service and the execution of successful projects." Continue Reading

Mold quality, materials, service and delivery time from StackTeck are exceptional.

Monterrey, Mexico

"StackTeck has been our partner since 1999. Mold quality, materials, service and delivery time from StackTeck are exceptional." Continue Reading

Performance, Product Quality, and Tooling Longevity

USA

We have been very pleased with Stackteck support as a one-stop source for all of our medical molding applications. In applications where processing performance, product quality and tooling longevity are required, Stackteck is the mold maker of choice. Continue Reading

Great Technology and an Outstanding Team!

Colombia

I recommend StackTeck because they are a serious Company with great technology and an outstanding team that provides quality and effective solutions. Continue Reading

Breakthrough Technology for high-volume high-barrier food containers

USA

The cell employs a StackTeck 64-cavity stack mold (2 x 32) that is co-injection molding multilayer thinwall plastic food containers with an inner and outer layer of PP ... currently produces parts at a rate of greater than 200 million parts per year at a cycle time of 7.5 seconds. Continue Reading

Still Perfect Shape after Millions of Cycles

Chile

"After millions of cycles the injection molds are in perfect shape and continue producing CSD 1881 Caps with the same quality that they have since the beginning." Continue Reading

Running 30% faster

USA

Both molds are running faster cycles and our QC department has approved the parts. This is a big improvement for us….and will allow us to run the newest assembly equipment at speeds over 30% faster than our old equipment. Continue Reading

Highly Recommend StackTeck in Capability, Quality, Support, and Customer Relations

Worldwide

Working with Stackteck has provided me with an assurance of working with a team of thorough professionals. StackTeck's engineering strength combined with excellent customer care are among the many characteristics that have helped me with various projects. StackTeck handles and supports every project(small or large) with the same level of enthusiasm. Continue Reading

High-quality, efficient, low-cost Solution

Mexico

"The 5 piece collapsing core technology enabled us to produce low weight parts with higher cavitation moulds, all with a 10 second cycle time ..." Continue Reading

Very Fast Cycle Times

Mexico

"The manufacturing cycle times of these molds are very fast, which indicates that the design of the molds and especially their cooling is excellent." Continue Reading

Search

5 Piece Collapsing Core Technology to Produce Paint Cans

Running 30% faster

Setting new Speed Benchmarks II

Setting new Speed Benchmarks

High-quality, efficient, low-cost Solution

Beverage Caps

Custom Closures

PET Preforms

Thinwall Packaging

Medical Molds