Over 1200 Flip-Top In Mold Closing (IMC) Cavities Manufactured by StackTeck

2x64 Flip Top Cap Mold
StackTeck is known for its innovations in cap and closure mold technology. Over 90% of flip-top cap molds have been manufactured with IMC capability. This technology enables a more precise closing motion and the opportunity to close the living hinge while the plastic is still hot providing a better quality part and an improved life of the hinge.

StackTeck's flip-top cap mold features:
![32 CAV. FLIP TOP OIL (3) [#Beginning of Shooting Data Section]
Nikon D700
2010/12/23 14:35:56.84
World Time: UTC-5, DST:OFF
RAW (14-bit)
Image Size: L (4256 x 2832), FX
Lens: 24-70mm F/2.8G
Artist: hwg
Copyright: berusa@sympatico.com
Focal Length: 60mm
Exposure Mode: Aperture Priority
Metering: Spot
Shutter Speed: 1/2.5s
Aperture: F/8
Exposure Comp.: 0EV
Exposure Tuning:
ISO Sensitivity: ISO 200
Optimize Image:
White Balance: Auto, 0, 0
Focus Mode: AF-S
AF-Area Mode: Single
AF Fine Tune: OFF
VR:
Long Exposure NR: OFF
High ISO NR: OFF
Color Mode:
Color Space: sRGB
Tone Comp.:
Hue Adjustment:
Saturation:
Sharpening:
Active D-Lighting: Normal
Vignette Control: Normal
Auto Distortion Control:
Picture Control: [SD] STANDARD
Base: [SD] STANDARD
Quick Adjust: -
Sharpening: 3
Contrast: Active D-Lighting
Brightness: Active D-Lighting
Saturation: +2
Hue: 0
Filter Effects:
Toning:
Flash Mode:
Flash Exposure Comp.:
Flash Sync Mode:
Colored Gel Filter:
Map Datum:
Image Authentication: OFF
Dust Removal: 2010/12/23 13:59:34
Image Comment:
[#End of Shooting Data Section]](https://stackteck.com/wp-content/uploads/2020/05/32-CAV.-FLIP-TOP-OIL-3-scaled.jpg)
- Flip-top cap molds enable a hinge to be incorporated in the plastic part design
- Parts are typically molded in
the open position and may be ejected “open” or in the “closed” position - We make a variety of flip top
closures with multi-point hinges, butterfly hinges and in-mold closing technologies for household, personal care, food, pharmaceutical, and beverage markets
Tooling solutions focused on the unique challenges of the Cap & Closure Industry
- Plastic part design assistance
- Prototype development
- Cycle time optimization and high volume productivity solutions using FEA and Mold Filling analysis technologies
- Engineered precision and ease of mold maintenance
- Global start-up and technical support in NA, SA, Europe, Asia, and the Middle East
Additional Flip-Top Closure Mold Video with Servo IMC Technology:
Cap & Closure Mold Testimonials from around the Globe

Multi-Material Closures
Cap & Closure Mold Quicklinks:

Beverage Closure Mold