StackTeck

Search

  • English
  • Español
  • 日本語
  • 当社
    • 品質管理
    • スタックテックのシステム
      • 展示会でのスタックテックのパフォーマンスベンチマーク
      • スタックテックの業界賞
        • インモールドデコレートIMDA賞
        • リードタイムリーダー賞
        • スタックテックRJG認定
    • StackTeck自動化システム
    • スタックテック アジア
      • アプリケーション
      • 品質が最優先
    • スタックテックのお客様の声
      • 薄肉パッケージ
      • キャップ&クロージャーお客様の声
      • 医療業界のお客様の声
      • その他の大量生産製品のお客様の声
    • 今後のスタックテックイベント
    • ニュース
    • インモールドラベルのトレンド、及び技術
    • ビデオ
    • 報告書
      • 金型メーカーの選び方 – 挑戦と機会
      • 射出成形パーツのプロトタイプ:なぜスコープの定義はとても重要なのか!
      • プラスチック部品設計過程においてのエンジニアリング評価ツールの使い方
      • 射出金型投資対効果の改善
      • スタックモールド金型技術:どのように、そしてなぜ機能するのか
      • インモールドラベリングにおけるシステム統合
      • 革新的な金型技術を利用し金型セルを最大限に活かす
      • 射出金型への効果的なメンテナンスプログラムを作る際の鍵
    • パンフレット
    • プロモーション映像
    • StackTeck プライバシーポリシー
  • 専門性へフォーカス
    • 飲料用キャップ
      • 炭酸清涼飲料用金型
      • ミネラルウォータークロージャ
      • ホットフィルクロージャ
      • その他のキャップ&クロージャー金型
    • カスタムキャップ&クロージャ金型
      • ネジ抜きクロージャ
      • コラプシングコアクロージャ
      • バンプオフキャップ&クロージャ金型
      • フリップトップキャップ&クロージャ
        • インモールドクロージング(IMC)
        • ヒンジクローズ成形(HMC)
        • フリードロップクロージャ―金型
      • パーソナルケア
      • マルチマテリアルクロージャ
    • PETイノベーションの専門性
      • PETプリフォーム金型
      • PETホットランナー
      • 金型冷却– KOOLTRACK™
      • 後冷却
      • PET金型認証
    • バケツ
      • • バケツ金型
      • TRIM バケツ
      • バケツの蓋用金型
      • バケツ用ロボット
      • KoolTrack™ –バケツ
    • 薄肉パッケージ
      • バリアコンテナ― / 蓋
      • 超軽量容器/蓋
      • 園芸用
    • インモールドラベル (IML)
      • IML 容器
      • IML 蓋
      • IML バケツ
    • 医療用金型
      • 個人用防護具とコロナウイルス検査キット部品
      • 投薬カップ
      • 実験器具/ペトリ皿
      • 製薬
      • 医療用薄肉容器
    • その他の大量生産用金型
      • カトラリー金型
      • 衣類用ハンガー金型
      • 屋根板金型
      • フラットパネル、及びトレー用金型
  • 製品
    • FastTrack™
      • FastTrackTM自動化
      • FastTrack™ Terms and Conditions
    • 金型技術
      • 片面金型
      • スタックモールド金型
      • 射出金型の迅速な型替え(QPC)
      • コインジェクション金型
      • マルチマテリアル射出金型
      • TRIM超軽量化金型
    • IML自動化システム
      • IML パイロットセル
      • IMLモジュラーシステム
    • 大型金型プログラム
    • 金型ベース
    • 射出金型システム
      • 射出金型システム統合
      • ターンキー射出金型システム
  • さらにサステイナブルで軽量のプラスチックパッケージ
    • マルチゲーティング
    • 超高速射出
    • マイクロセルラー射出成形
    • TRIMー薄凹射出成形
    • 射出圧縮成形
  • 射出成形サービス
    • 射出成形パーツデザイン
    • 金型フィリング分析
    • プロトタイプ:射出成形パーツ
    • 射出金型の改修と修理
    • 射出金型交換部品
    • サービスとトレーニング
    • 射出成形パーツ検査
  • スタックテックの仕事
    • 企業文化
  • 弊社への連絡方法はこちら
    • スタックテックからの見積のご依頼
    • StackTeckへ電話する
    • StackTeckへメール
FastTrack™ Terms and Conditions
YOU ARE HERE: Home / 製品 / FastTrack™ / FastTrack™ Terms and Conditions

FastTrack™ Terms and Conditions

FastTrack™ Terms and Conditions

Steel Prices
Quoted pricing is based on known steel pricing at the time of quotation and may be subject to adjustments after 2
weeks from the initial quotation date in accordance to actual steel prices at that time.

Limited Warranty
Subject to the exclusions set forth below, StackTeck warrants that all goods sold hereunder shall be free from defects in material and workmanship for a period of twelve months from the date of shipment, or up to 4,000,000 cycles, whichever comes first.

Warranty
Limitation on Warranty
During the warranty period, StackTeck will repair or replace any parts sold hereunder which, in the sole discretion of StackTeck, are considered to have been defective in materials or workmanship at the time of manufacture or shipment. The warranties herein do not cover any items that have been subject, in the sole discretion of StackTeck, to misuse, negligence, accident, or improper storage or handling, nor which have been operated over the normal designed conditions or limits or have been repaired or modified by personnel other than authorized StackTeck personnel.

The warranties herein do not extend to mold components which, due to the inherent design of the molded product, are fragile in nature, nor do they extend to mold components which are damaged due to corrosion. StackTeck’s sole obligation and the customer’s sole remedy, under the warranties set out herein shall be the repair or, at StackTeck’s sole option, the replacement of any goods sold hereunder which may be determined by StackTeck, in its sole discretion, to be defective; provided that the customer has notified StackTeck in writing of such defects within the warranty period and, provided further, that the customer will, at the customer’s sole expense, ship such goods to StackTeck's plant for repair or replacement, if necessary.
The warranties set forth in this document are the sole and exclusive warranties, and are made in lieu of all other warranties. There are no other warranties, express or implied, by operation of law or otherwise, for any products, services or other items sold or furnished under this agreement, and StackTeck disclaims all implied, statutory or other warranties or conditions of any kind including, without limitation, warranties and conditions of merchantability, satisfactory quality, non-infringement or fitness for a particular purpose. In respect of any products supplied under this contract that are manufactured by others, StackTeck gives no warranty whatsoever and the warranty of the manufacturer, if any, will apply.

Shipping, Title and Risk of Loss
Customer orders shall be processed in order of their acceptance by StackTeck, and StackTeck shall use its reasonable commercial efforts to ship goods specified in accepted customer orders in accordance with StackTeck’s manufacturing schedule. Shipment dates are estimates.

Interruption, Cancellation, and Amendment Charges
If during the design and/or manufacture of the above mold, it is placed “on hold” by the Purchaser, a reinstatement charge will be applied by StackTeck when the order is removed from “hold”. This charge is to recover administration, re-scheduling, re-tooling, additional set-up time and the re-issue of engineering drawings. Amendments to the original scope set out in this quotation may be subject to additional charges.
StackTeck reserves the right to cancel or re-quote the order after an order has been “on hold” for a period exceeding 180 days.

General

StackTeck shall not be responsible for and no liability shall result to Buyer for any delays in delivery or in performance which result in circumstances beyond StackTeck’s reasonable control including, without limitation, product unavailability, carrier delays, delays due to fire, flood, storm, severe weather conditions, pandemics, failure of power, labor problems, acts of war, terrorism, embargos, acts of God, shortages of supplies of raw materials or components or acts of any government or agency (each an Event of Force Majeure).

The terms and conditions as herein written shall supersede all previous communications, agreements or contracts, written or verbal, and no understanding, agreement, term, condition, or trade custom at variance herewith shall be binding on StackTeck. No waiver or modification of the terms and conditions hereof shall be effective unless in writing and signed by both parties. Any term contained in any purchase order or other document which is different from, inconsistent with, or additional to StackTeck's terms and conditions shall be void.

Specifications identified as "Customer Specified" are features specifically requested by the customer but are NOT necessarily recommended by StackTeck. StackTeck will provide its best effort to assist the customer in making the mold work, however the customer must accept the risks and implications for project deliverables (scope, performance, timing & cost) with respect to customer specified features and requirements.  In the case of customer specified third party vendor selection, StackTeck will provide project management on a best efforts basis while any liability with respect to project deliverables shall be at the customer’s risk.

Withholding Taxes
All quoted prices are "net" of any withholding tax obligations that may apply.

 

Product Design and Testing

Product Design

It is expected that before the projected lead time for a project can begin, StackTeck will receive a completely detailed product design along with the shrinkage value to be used. StackTeck will offer assistance in the design of the part if required, but the lead time for the project will start only after the part drawing has been approved. Design assistance may include a plastic part design with an aggressive L/T ratio, however StackTeck cannot assume responsibility for design and resin selections that result in excessive core shift or inability to fill the part. Due to the unpredictable nature of actual shrinkage rates, and their dependency on material selection and the final running environment within any given manufacturing facility, shrinkage predictions must be based solely on each individual company's experience with similar resins and part wall sections. Any predicted shrinkage rate advised by StackTeck is an

estimate only and is based solely on its test room facility experience.

Further, StackTeck assumes no responsibilities for the function of the product in its final environment, or infringement upon any existing, or pending patents known or unknown.

Mold Documents

All complete molds are supplied with a mold manual which includes: drawings for the main assembly of the mold, the molds customized stack components, and any related electrical and/or hydraulic schematics.

All mold design documentation submitted by StackTeck to the Purchaser remains the property of StackTeck upon placing a purchase order corresponding to this quotation, the purchaser agrees to maintain StackTeck mold design documentation as confidential.

Estimated Performance Targets

Estimated cycle times, plastic part weights, part shrinkages, and minimum tonnage estimates, if given, are based solely on the information provided by the customer along with StackTeck’s experience in its test room facility. They are not a guarantee of the actual cycle time, final part weight, part shrinkage, or minimum tonnage, required to run under production conditions in the customer’s plant. As with actual shrinkage rates, part weight, cycle time, and minimum tonnage will vary as a result of the final running environment within any given manufacturing facility. StackTeck will optimize the molding process during the scheduled mold test, on a best-efforts basis, to achieve optimal cycle time, part weight, part shrinkage and tonnage requirements.  The mold will be designed to maximize cycle efficiencies. It is assumed that the end use molder has the essential adequate plant auxiliaries, such as electricals, compressed air, water flow, water pressure, and water temperature.

Standard Test

The Standard Test will consist of the following:

Customers mold will be tested prior to shipment with the purchaser’s supplied resin in the most suitable, available StackTeck test machine. One half hour dry cycle, one Color, one resin will be run for 2 hours.  Five full shots will be used for part and weight measurements of final shots. Up to six critical sizes to be measured for customer.  10 shots (10% Lot for large cavitation), test log (stating molding conditions & parameters) will be supplied to customer for mold approval.  Any additional customer requirements beyond above stated ‘Standard Test’ could be chargeable. Example (Steel Safe, multi-color / resin, extended part runs etc.)

Customer to provide resin, color & packaging material 6 weeks before mold is to be tested in order to maintain test schedule.

Share

お見積りのご依頼

スタックテックのベンチマーク生産設備ソリューションお見積りのご依頼はこちらをクリック - 製品デザインのサポートやプロトタイプから、高性能金型や単一サプライヤーによる完全成型システムまで

お見積りのご依頼     

報告書のダウンロード

射出成型製品コンセプトや成型オペレーションを最大限活用する最新の洞察にアクセス。スタックテックのデザインやアプリケーションの専門家による報告書を取得。報告書のダウンロード

Benchmark Testimonials

数百万回サイクル後でも完璧な形を維持します

数百万サイクル経っても射出金型は完璧で、CSD1881キャップを組付け初期と変わらぬ品質で生産し続けています。 Continue Reading

最高な技術と優れたチームです!

スタックテックは真面目な会社で最高な技術と優れたチームを持っており、上質で効率的なソリューションを提供します。 Continue Reading

30%速くなったオペレーション

両方の金型はより早いサイクルで稼働しており、弊社の品質管理部も製品承認を致しました。 これは私達にとって大きな改善となります―――弊社の古い装置と違い、最新の組み立て装置を使用することにより、30%以上早くなるでしょう。 Continue Reading

StackTeckの誠実さとプロ意識

スタックテックの金型の質と技術、会計、エンジニアスタッフのプロ意識のレベルはお勧めできます。 Continue Reading

StackTeckの能力、品質、サポート、そして顧客との関係性はおすすめです

StackTeckと仕事を行い、プロフェッショナルなチームと仕事をしているという確信がもてました。 StackTeckのエンジニア能力と素晴らしい顧客対応こそが、今まで様々な弊社のプロジェクトを支えてくれました。StackTeckは大小の各プロジェクトに、同じ熱量で取り組み、サポートします。 Continue Reading

劇的な薄壁コンテナ―の軽量化

スタックテックのトリム提案は薄い壁コンテナ―を劇的に軽くし、35%以上の重量削減になりました。 Continue Reading

大量生産、高バリア性能食品容器の新技術

StackTeckの64キャビスタックモールド金型(2x32)を採用し、ポリプロピレンの内層と外層、EVOHのバリア層のコインジェクション成形多層薄肉プラスチック食品容器用です。 このシステムはサイクルタイム7.5秒で、年間で2億個以上のペースで生産しています。 Continue Reading

超高速サイクル

これらの金型の生産サイクルタイムはとても早く、これは金型デザインや特に冷却が優れていることを表しています。 Continue Reading

高品質、効率的、低コストソリューション

5点コラプシングコア技術だと、ハイキャビテーション金型で軽量パーツを製作することを可能になり、従来の射出ブロー金型ではキャビ数が少なく、サイクルタイムは18秒だったのに対し、全てのサイクルタイムが10秒となります。 Continue Reading

パフォーマンス、製品の質、ツールの寿命

弊社の医療金型アプリケーションに対するニーズに一挙に応えるサポート. 2009年以降現在に至るまで計画外の中断は無く、ノンストップで生産しています。これは、スタックテックの製品品質が良いということです。 Continue Reading

StackTeck の金型の質、素材、サービス、デリバリータイムはとても優秀です。

スタックテックは1999年から弊社のパートナーですスタックテックが提供する金型の質、素材、サービス、デリバリータイムは完璧です。 Continue Reading

新しいスピードのベンチマークの設定

16オンス乳製品薄肉容器用2x8スタックモールド金型は、3.3秒という「かつてない」 サイクルタイムで稼働しています。 Engel社全電気式eスピード650T機にて稼働しています。 Continue Reading

医療個人用保護具のフェースシールドスタックモールド金型を驚きの短時間で納品しました

StackTeckはCovid-19の渦中、医療従事者や最前線で働いている方々のための個人用保護具フェイスシールドを生産する2x2スタックモールド金型を3.5週で届けてくれました。 Continue Reading

期待を超えた唯一の金型サプライヤー

GOPLAS設立から19年間の間、様々な国から、様々なサプライヤーから金型を購入してきました―イタリア、ドイツ、メキシコ、中国、カナダ―。全射出金型の中でたった2つだけが、我々の期待を超えました。その金型は、2つとも、カナダのStackTeckが製造したものです。 Continue Reading

技術とサービス面に対する期待を超えた

StackTeckを金型サプライヤー、そして金型サービスの提供者として強く推薦します。彼らは真面目で、責任感があり、きちんとしていて、カスタマーサービスへ情熱があり、プロジェクトが成功するような実行力があります。 Continue Reading

ファーストクラス2×2 5リットルコンテナ―スタック金型

“弊社の金型字術者は、3つの新しい金型を受け取ったのち. それはファーストクラス2x2 5リットルコンテナ―スタック金型です。” Continue Reading

新しいスピードベンチマークの設定

ウェーブスイスのブースにて、スタックテックは次世代の1881タンパーエビデント性炭酸入り清涼飲料2.8秒4つのキャビティ付キャップ金型を作動し、前回のスピードより1秒改善しました。 Continue Reading

飲料用キャップ

  • 炭酸清涼飲料用金型
  • ミネラルウォータークロージャ
  • ホットフィルクロージャ
  • その他のキャップ&クロージャー金型

カスタムクロージャー

  • ネジ抜きクロージャ
  • コラプシングコアクロージャ
  • バンプオフキャップ&クロージャ金型
  • フリップトップキャップ&クロージャ
  • マルチマテリアルクロージャ

PETイノベーションの専門性

  • PETイノベーションの専門性
  • PETプリフォーム金型
  • PETホットランナー
  • 後冷却
  • 金型冷却– KOOLTRACK™
  • PET金型認証

薄肉パッケージ

  • IML 容器
  • バリアコンテナ― / 蓋
  • 超軽量容器/蓋
  • 園芸用

医療用金型

  • 投薬カップ
  • 実験器具/ペトリ皿
  • 製薬
  • 医療用薄肉容器

Copyright 2021 StackTeck Inc. All rights reserved.