2×2 Cavity Hospital Wash Basin

2×2 Hospital Wash Basin Stack Mold

Part Description: Hospital Wash Basin
Number of Cavities: 2×2
Date Built:
Noteworthy Features: Stack Mold

Breakthrough Technology for high-volume high-barrier food containers

The cell employs a StackTeck 64-cavity stack mold (2 x 32) that is co-injection molding multilayer thinwall plastic food containers with an inner and outer layer of PP ... currently produces parts at a rate of greater than 200 million parts per year at a cycle time of 7.5 seconds. Continue Reading

Kortec Inc. USA

High-quality, efficient, low-cost Solution

"The 5 piece collapsing core technology enabled us to produce low weight parts with higher cavitation moulds, all with a 10 second cycle time ..." Continue Reading

Industrias FC, S.A de C.V Mexico

Still Perfect Shape after Millions of Cycles

"After millions of cycles the injection molds are in perfect shape and continue producing CSD 1881 Caps with the same quality that they have since the beginning." Continue Reading

Envases CMF Chile

The ONLY mold supplier that has Exceeded our Expectations

"During the 19 years that Goplas has been operating, we have bought molds from many companies in different countries; Italy, Germany, Mexico, China and Canada. From all of the injection molds that we have, only two have delivered results that are above the expectations that we had for them. Both molds were made by StackTeck in Canada." Continue Reading

GOPLAS S.A. Mexico

Dramatic light-weighting of a Thinwall Container

"StackTeck’s TRIM proposal dramatically light weighted a thinwall container resulting in a weight reduction of more than 35%." Continue Reading

Srithai Superware Thailand

<< Prev

Next >>

Search

2×2 Cavity Hospital Wash Basin

2×2 Hospital Wash Basin Stack Mold

Beverage Packaging

Custom Closures

Thinwall Packaging

Medical Molds

Other