Highly Recommend StackTeck in Capability, Quality, Support, and Customer Relations
Working with Stackteck has provided me with an assurance of working with a team of thorough professionals. StackTeck's engineering strength combined with excellent customer care are among the many characteristics that have helped me with various projects.
Mold standardization and the scalability feature have been a success with some of our mold programs. In Engineering StackTeck is willing to undertake Analysis over and beyond basic services offered.
StackTeck handles and supports every project(small or large) with the same level of enthusiasm.
My favorite part of dealing with StackTeck is that I have never been refused a project by StackTeck. StackTeck's capability and the willingness to take risks have always provided me with assurance that has, in turn, helped me confidently take on challenges at my end.
Global Leader in Plastic Packaging Solutions Senior Program Manager Worldwide June 7, 2017
First-class 2×2 five-liter Container Stack Mold
“Our molding technicians said, of the 3 new molds we received, we liked the StackTeck tool the best. It’s a first class 2x2 5 Liter Container stack mold.”
OEM Molder Q.R. Engineering Manager USA May 30, 2017
Surpassed our Technical and Service Expectations
I contacted StackTeck as a result of the recommendation from other companies that had worked in other projects with them. Based on that recommendation, we did an evaluation of StackTeck to determine if their capacity and vocation were suitable to fulfill the expectations that INOVA PHARMAPLASTICS S.A. de C.V. had.
In the evaluation of the company, we visited their facilities and interacted with their specialists including the ones that manufacture the molds as well as their representatives in Mexico, whom surprised us greatly and surpassed the technical and service expectations that can be anticipated for a specialty supplier.
They always showed their professionalism and seriousness during the development of the project, and they inspired trust in our working team in each of the stages of the project and all the way to its successful completion.
The fact that they have first class manufacturing facilities and a center to test molds with similar characteristics to those of a production plant that can be used to fine tune molds before they are shipped to the customer, allowed for the project to be done in a safe and transparent way for us.
It’s because of all of the above that I highly recommend StackTeck as a supplier of molds and post-sale mold service as they are a company that is serious, responsible, organized, and passionate about customer service and the execution of successful projects.
Antonio Ruesga Estrella – INOVA PHARMAPLASTICS S.A. de C.V. Líder de proyecto Brazil May 30, 2017
Pioneering Cutlery Family Molds
GL Plásticos y Empaques is very grateful and satisfied with the cutlery family molds made by StackTeck, as well as the support provided for the development of an improved product for the food industry. The design of this cutlery is pioneering in the Mexican market. It is 100% certain that we will continue our growth hand-in-hand with StackTeck since they were a fundamental part throughout the development process of our product.
Florencio Garcia - GL Plásticos y Empaques Manufacturing Manager Mexico May 30, 2017
Impressive IML Moulds. Very Positive Experience.
The new moulds arrived at our facility last Friday, we trialed them yesterday and today and I’ve gotta say, I think my lead moulding technician is in love!! He is very impressed with the moulds and feels that they are much better than the local ones we have had made! I’ll send you some video of them running with IML ASAP.
This is our first experience with StackTeck moulds, and it has been very positive! I’d like to thank the StackTeck staff for all the help this year. The whole experience was easy and very professional… …and I’m sure the moulds will back this experience up. It’s a great thing to have an overseas mould supplier who can support the challenging projects we’re planning for the future.Leading Injection Molder of Packaging in Asia-Pacific Asia-Pacific region March 9, 2016
Mold quality, materials, service and delivery time from StackTeck are exceptional.
Contenedores IEM, S.A. de C.V. (IEMCO) is a manufacturer of medium and wide mouth PET jars and closures located in Monterrey México for the food and cosmetic industries with over 25 years of experience.
StackTeck has been our partner since 1999. We still have the first 4 cavity 110mm closure mold that was bought to TRADESCO (now StackTeck) this mold has been running for 16 years with +25 million cycles, still working perfectly.
We also have an 8 cavity 110mm closure mold that has more than 5 million cycles and is basically new, no problems at all.
Due to the excellent performance of their molds during the past years, we recently bought a 110mm Snap-On closure mold and we are in the process to buy a second 8 cavity 110mm closure mold.
All this has been achieved with the respective maintenance suggested by StackTeck.
Mold quality, materials, service and delivery time from StackTeck are exceptional.
Contenedores IEM, S.A. de C.V. (IEMCO) Monterrey, Mexico July 14, 2015
Partnership in high-volume, fast cycle-time markets
Operating in high-volume, fast-cycle-time markets such as hospital and homecare products, where shipments are sent daily, Medline Industries Inc. (Mundelein, IL) takes its responsibility to customers very seriously. The manufacturer of medical/hospital supplies (think medicine cups and washbasins) has found that partnering with its suppliers is critical to its success. Jack Maze, VP of manufacturing at Medline's Dynacor Div., says his relationship with mold manufacturer StackTeck Systems Ltd. (Brampton, ON), molding machinery maker Husky Injection Molding Systems Ltd. (Bolton, ON), and CBW Automation (Fort Collins, CO) began more than a decade ago.
Every project begins with a cycle objective, Maze explains. The objective in the 1000-ton press was 5 seconds. StackTeck and Husky engineering teams examined the required parameters of the molding machine to see if, in fact, they could get to the cycle rate Maze required.
The automation of the project involved CBW, which participated early in the development and worked collaboratively with StackTeck and Husky to ensure that the automation could support the cycle goal. "To get in, grab the parts, and get out in 0.5 second or less requires special equipment and integration," says Jim Overbeeke, VP sales for CBW.
Partnerships like that of Medline, Husky, StackTeck, and CBW don't develop overnight. The three suppliers have worked together for many years with a variety of customers. A level of trust has been achieved that doesn't often happen when different suppliers are called upon to work together only intermittently during a program. "There's a lot we can do in a partnership situation with a good working relationship," says Tustin. "Everyone has to trust everyone else."
Plastics Today USA October 27, 2014
Dramatic light-weighting of a Thinwall Container
StackTeck’s TRIM proposal dramatically light weighted a thinwall container resulting in a weight reduction of more than 35% - a key accomplishment in our overall sustainability strategy. The costs to change the part were minimized by a plan to replace core components only in the existing production mold. Once converted, the mold continued to run with the original molding machine and IML automation. 90% of the surface area of the container was thinned out to unprecedented levels while maintaining top load strength, high quality IML decoration, original rim thickness and bale lug features for the pail handle.
Winner: Best Thinwall Packaging Award 2014
Srithai Superware Thailand October 27, 2014
Molds built to Last
After 5 years of operation, these molds show practically no wear or corrosion.
GOPLAS S.A. Mexico October 27, 2014
No Adjustments needed with Spare Parts
If any part of the mold is damaged due to an operation mistake or any other accident, we then order it. When the part arrives, we mount it and the mold works perfectly. We don’t experience what has happened to us with other molds in which each cavity or core is different so that adjustments are needed for each spare.
GOPLAS S.A. Mexico October 27, 2014
Very Fast Cycle Times
The manufacturing cycle times of these molds are very fast, which indicates that the design of the molds and especially their cooling is excellent.
GOPLAS S.A. Mexico October 27, 2014
The ONLY mold supplier that has Exceeded our Expectations
During the 19 years that Goplas has been operating, we have bought molds from many companies in different countries; Italy, Germany, Mexico, China and Canada. From all of the injection molds that we have, only two have delivered results that are above the expectations that we had for them. Both molds were made by StackTeck in Canada.
GOPLAS S.A. Mexico October 27, 2014
Still Perfect Shape after Millions of Cycles
According to Envases CMF Operations Manager, Luis H. Girod: “StackTeck has not only been a supplier but really a partner. Their team has always showed us their professionalism, expertise and business knowledge. Those are qualities that confirm that our choice of StackTeck was the right one. In terms of quality, there are no doubts. After millions of cycles the injection molds are in perfect shape and continue producing CSD 1881 Caps with the same quality that they have since the beginning. As a result of our excellent experience with StackTeck, we have gained new business and we hope to continue doing so in the future.”
Envases CMF Chile July 27, 2014
High-quality, efficient, low-cost Solution
We were assigned a project for high volume applications with a well known cosmetics firm while competing with other companies that offered the same manufactured part using a traditional injection blow mould. We were able to offer a high quality, efficient and low-cost solution. The 5 piece collapsing core technology enabled us to produce low weight parts with higher cavitation moulds, all with a 10 second cycle time versus lower cavitation and 18 second cycle time that the traditional injection blow molding offered. We were very pleased with StackTeck’s support and expertise, right from the product development stage to the design and manufacturing of the mold.
Industrias FC, S.A de C.V Mexico March 27, 2014
Breakthrough Technology for high-volume high-barrier food containers
Kortec Inc. has recently achieved another industry first with its successful development and production of a turnkey manufacturing cell for producing high barrier food containers. The cell employs a StackTeck 64-cavity stack mold (2 x 32) that is co-injection molding multilayer thinwall plastic food containers with an inner and outer layer of PP, and a barrier layer of EVOH. The system currently produces parts at a rate of greater than 200 million parts per year at a cycle time of 7.5 seconds.
Kortec Inc. USA March 27, 2012
